E.M.C.I. NBMS Hiswamakelaar Stichting VRT - Verenigd register van taxateurs

Koopmans 14.00 Deckhouse

Image of


Dimensions (m): 14.00 x 4.00 x 1.10 Ref. nr.: 150408
Mooring: Near Goes, Netherlands Construction year: 1995
Price Information: part exchange can be discussed Material: steel

Vision Doeve Brokers

Very well constructed and designed round bilge blue water sailing yacht / motor sailor (center board) with fan-shape bow wherein currently a basic marine plywood is installed with behind it a good insulating layer. The ship's facilities include a poop deck, spacious deckhouse, wide sideways, stainless steel railings and stainless steel rubbing strake and gunwale. At this time, the ship is ready to sail on the engine. Inside and outside she has a solid 2-component coating system. Furthermore, she should be finished and that gives the new owner the opportunity to sail a new and solid yacht for a fraction of the new cost. Drawings for a one or two-mast variant are present so this choice has still to be made. Trade-in of a small motorboat or sailing yacht is negotiable.

More information

General information

Yard:Yard Bakker, NL-Diemen
Designer / Architect: D. Koopmans Jr.
Hull shape:round bilged
Hull material:steel 6/5 mm
Deck material:steel 4 mm
Superstructure material:steel 4 mm
Construction method:flare shape bow
stainless steel rubbing strake
stainless steel capping
stainless steel bollards
stainless steel cleats
Keel:centreboard (voorbereid / prepared / vorbereitet / préparé)
Steering system:tiller
hydraulic (voorbereid / prepared / vorbereitet / préparé)
Windows:double glazing
& portholes
Displacement (approx.):14 ton
18 ton after finishing
Ballast (approx.):3 ton blocks
Airdraft (approx.): 2,60 m
Owner:Dutch owner
Colour / Paint System:sandblasted
Sigma two component system
blue hull
white superstructure
Suitable for / as:suitable for bigger waterways
ocean going
inland waterways
General information:not finished project
offered in the condition that she is in
For sale due to health issues
Additional information:roomy aftdeck
roomy foredeck
Hull shape is suitable for drying out.
beautiful sheer

Technical information

Enginepower:85 Hp
63 kW
Engine brand:Mercedes
Engine model:OM615
Number of cylinders:5
Overhaul engine:2015 reconditioned installed
Running hours (approx.):450 after overhaul
Fuel tank (approx.):1000 litre
steel tank(s)
Cooling system:intercooling
wet exhaust
Propulsion:3 blade propeller
Gearbox:PRM hydraulic (2015)
reduction/ratio 3:1
Electricity system:simple electric system
Batteries:1x 100 Ah starter batterie(s)
3x 120 Ah domestic batterie(s)
Battery charger:present
25 Amp
Inverter:Ective SI302 Sine inverter 12/3000
Solar panels:2x 200 Watt solar panel
Fresh water tank (approx.):1000 litre
steel tank(s)
Hot water system:boiler/water heater via 230 Volt and engine cooling system
Diesel waterseparator:2x diesel waterseparator
Gas system:not according to the present requirements


Interior:Marine Plywood
see photographs
Insulation:glass wool with aluminium foil
Cabins:3 cabins
Berth:Forward: 1x 2-pers
Portside cabin: 1x 2-pers
Starboard cabin: 1x 2-pers
Lay-out plan (not to scale):see attachment
Toilet / Heads:2x chemical toilet
Galley:L-shape galley
Cooker:4-burner hob
on gas
not installed
Fridge / Refrigerator:present
230 Volt
Freezer:small ice compartment
Washbasin:2x stainless steel sink
Headroom (approx.):forward cabin (approx.) 2,03 m
toilet (approx.) 1,94 m
galley (approx.) 2,01 m
salon (approx.) 2,02 m
aftcabin (approx.) 1,91 m
bathroom / toilet aft (approx.) 1,86 m / 1,75 m


Anchor equipment:electric anchor winch
CQR anchor
bow roller
electric anchor winch
5 m chain
anchor line
Searail / Pulpit:stainless steel searail
Safety :2x life jacket
Additional information:Part exchange can be discussed.
Interesting project to finish for someone with two right hands or to have it done by a yard.

Tell a friend