Work vessel / Crane vessel with ADN Sold
Vision Doeve Brokers
A barge converted into a floating working vessel that is fully certified for zone 2 NL and zone 3 & 4 EU. Due to the ADN certification she is also allowed to work in harbors with dangerous goods. Equipped with a renovated mechanical crane on a slewing ring with a lifting capacity of 2,5 metric tons. This makes it a multi-purpose ship with a 400 liter dredger grab, 560 kg pile driver with pile cap, 2x 11 meter long steel pile guides and a wire winch with 4 wire drums on the rear of the working deck powered by an under deck standing Güldner diesel which can also be used for the anchors or for hoisting via the bow roller. Below deck there is a lot of storage space and a workbench. In our view, an all-rounder for wet contractors or for ships repair.
More information
General information
hard chine
new steel is welded
rubbing strake
2 watertight bulkhead(s)
Sturdy, heavily constructed
wheel
fish tail rudder
rubber window frames
hardwood outside doors
55,122 m3 displacement in empty condition
14,032 m3 displacement
everything down
B-registered
Costs for the change of ownership and / eventually deletion are for purchasers amount.
yellow bulwark
yellow superstructure
& white superstructure
last underwatership treatment 03-2019
zone 2 Netherlands
zone 3
zone 4
Waal, Lek & NL Rhine
valid until: 04-2026
ADN valid until: 04-2024
inland waterways
pushing bow
Underwatership is fully double plated.
Hull shape is suitable for drying out.
Great vessel for cruising on the European canals and rivers.
Great vessel for cruising on the French canals and rivers.
Technical information
116 kW
steel tank(s)
BOBS overflowing fuel safety system
box cooler
greased lubrication of propeller shaft
reduction/ratio 3:1
on diesel
400 Volt shore power connection
domestic batterie(s)
1x starter batterie(s) generator
1x starter batterie(s) auxiliary engine
1x 120 Ah starter batterie(s) crane
CTEK MXS 7.0 battery charger 12/7
Victron Blue Power battery charger 12/7
38 kVA 230/400 Volt
1500 RPM
3000 on the hour counter (approx.)
400 Volt
400 Volt
Güldner auxiliary diesel engine
Accommodation
Rigging and sails
steel
manual
Equipment
Pool anchor
anchor cable
& Aft:
Pool anchor
anchor cable
draadlier met 4 trommels via hulpmotor / wire winch with 4 drums via auxiliary motor / Drahtwinde mit 4 Trommeln über Hilfsmotor / treuil à câble avec 4 tambours via moteur auxiliaire
& Forward:
spudleg / pole
6,00 m under the bottom
specified length(s) is/are approximate
life buoys
according to the certification requirements
PowCon welding machine
O&K LS041 crane