Condor Comtess 44 No longer available
Dimensions (m):
13.10 x 4.10 x 1.10
Ref. no.:
130703
Mooring:
Near Amsterdam, Netherlands
Construction year:
1978
Material:
GRP
Vision Doeve Brokers
Fast going half plane motor boat with flybridge. The interior is spacious and in a pretty good condition. In 2011 she has had an osmosis treatment and therefore underwater in good condition. The sidewalks are around, the aft deck has a privacy screen around and foreseen with teak grating.
More information
General information
| Yard: | Condor Yachtbau D-Hamburg |
| Designer / Architect: | Condor Yachtbau |
| Hull shape: | deep-V |
| Hull material: | GRP |
| Deck material: | GRP GRP sandwich |
| Superstructure material: | GRP GRP sandwich |
| Construction method: | flying bridge aftcabin rubber rubbing strake half plane hull stainless steel bollards transom stern |
| Steering system: | manual hydraulic steering wheel inside and outside steering position |
| Windows: | aluminium windows frames aluminium outside door |
| Displacement (approx.): | 11 ton |
| Ballast (approx.): | trim ballast |
| Airdraft (approx.): | 3,45 m |
| Owner: | Dutch owner |
| Colour / Paint System: | white hull white superstructure 2010 Anti-osmosis treatment € 18.000,-- underwater ship sandblasted underwater epoxy protected |
| Suitable for / as: | seaworthy inland waterways |
| Additional information: | motor cruiser GSAK halfglider roomy foredeck spacious aftdeck |
Technical information
| Enginepower: | 2x 220 Hp 2x 162 kW |
| Engine brand: | DAF |
| Engine model: | DU 825 |
| Number of cylinders: | 6 |
| Construction year engine: | 1978 |
| Running hours (approx.): | portside 3080 starboard 2970 |
| Fuel: | diesel |
| Fuel tank (approx.): | 1200 litre 1 tank(s) |
| Cooling system: | intercooling wet exhaust |
| Propulsion: | 2x 3 blade propeller oil bath propeller stern tube |
| Gearbox: | 2x Twin-Disc hydraulic |
| Heating: | Newport by Dickinson stove heater on diesel stainless steel |
| Bow thruster: | Vetus 80 KGF 24 Volt |
| Electricity system: | 12 Volt 24 Volt 230 Volt 230 Volt shore power connection |
| Batteries: | 2x 230 Ah domestic batterie(s) 2x Exide Maxxima 800 CCA starter batterie(s) |
| Battery charger: | present Mastervolt IVO 6 Amp |
| Battery isolator: | present |
| Earth-leakage breaker: | present |
| Inverter: | Mastervolt 350 Watt inverter |
| Fresh water tank (approx.): | 600 litre 1 GRP |
| Water pressure system: | hydrophore pump |
| Diesel waterseparator: | 2x present |
| Gas system: | not according to the present requirements |
Accommodation
| Interior: | oak interior see photographs |
| Insulation: | sandwich construction |
| Cabins: | 2 cabins |
| Berth: | Forward: 1x 2-pers Aft: 2x 1,5-pers |
| Lay-out plan (not to scale): | see attachment |
| Bathroom: | Forward: washbasin cold running water Aft: washbasin cold running water hower is ready in 1 area together with the toilet |
| Toilet / Heads: | Forward: pumptoilet Aft: chemical toilet |
| Galley: | along ships |
| Cooker: | 2-burner hob on gas stainless steel |
| Fridge / Refrigerator: | Isotherm fridge / refrigerator 24 Volt |
| Freezer: | small ice compartment |
| Washbasin: | stainless steel sink |
| Water tap: | cold running water |
| Headroom (approx.): | forecabin (approx.) 1,74 m forward (approx.) 1,97 m galley (approx.) 1,96 m salon (approx.) 1,93 m aft (approx.) 1,90 m bathroom (approx.) 1,83 m aftcabin (approx.) 1,87 m |
Navigation equipment
| Navigation equipment: | Navman 7100 VHF Humminbird 200DX fishfinder Garmin GPS152 GPS 1x window wiper Sailor C402 VHF rudder indicator Nasa Target electric compass navigation lights |
Rigging and sails
| Mast: | apparatus wing stainless steel |
| Lowerable: | yes winch |
Equipment
| Anchor equipment: | electric anchor winch warping drum anchor with chain bow roller |
| Boarding ladder: | present stainless steel |
| Swimming platform: | present with teak |
| Searail / Pulpit: | stainless steel searail with teak on top of guardrail |
| Davits: | present |
| Safety: | fire extinguisher life buoy |
| Additional information: | stainless steel fender holder |
