Dutch Barge 28.50 with TRIWV
Dimensions (m):
28.50 x 4.85 x 1.10
Ref. no.:
230102
Mooring:
Near Zwolle, Netherlands
Construction year:
1905
Material:
steel
Price:
€ 74.500,--
VAT not applicable
Vision Doeve Brokers
Former inland cargo vessel that has been fully prepared by the current owner for further construction into a spacious (cruising) Live Aboard Dutch Barge. The decks, the cockpit and the entire superstructure have been renewed. A Spartan interior has also been built-in. Other features include two hydraulically operated spud poles and a proportionally adjustable hydraulic bow thruster. The steelwork is neatly, solidly and thoughtfully executed. For example, the entrance to the engine room has been integrated into the steering console. In our opinion, this is a beautiful project to customize and the end result will be an amazing (cruising) Live Aboard houseboat.
More information
General information
Yard:
Shipyard J. van Aller, NL-Hasselt
Hull shape:
flatbottom
Hull material:
iron/steel
Deck material:
steel
Superstructure material:
steel
Construction method:
riveted
new steel is welded
rubbing strake around
bulwark around
open cockpit
self-draining cockpit
closed bollard cabinets
2 watertight bulkhead(s)
new steel is welded
rubbing strake around
bulwark around
open cockpit
self-draining cockpit
closed bollard cabinets
2 watertight bulkhead(s)
Steering system:
hydraulic
steel rudder
attached rudder
wheel
on steering pedestal
steel rudder
attached rudder
wheel
on steering pedestal
Windows:
hardwood window frames
hardwooden door
hardwooden door
Displacement (approx.):
65 metric tons
Ballast (approx.):
present
concrete
3 metric tons
concrete
3 metric tons
Airdraft (approx.):
3,30 m everything down
Owner:
Dutch owner
Registration:
Dutch registered
B-registered
Costs for the change of ownership and / eventually deletion are for purchasers amount.
B-registered
Costs for the change of ownership and / eventually deletion are for purchasers amount.
Colour / Paint System:
black hull
bordeaux red bulwark
white superstructure
see photographs
last underwatership treatment 05-2018
bordeaux red bulwark
white superstructure
see photographs
last underwatership treatment 05-2018
Certificates:
inland waterways certificated (TRIWV / ES-TRIN)
zone 2 Netherlands
zone 3
zone 4
valid until: 05-2025
zone 2 Netherlands
zone 3
zone 4
valid until: 05-2025
Suitable for / as:
inland waterways
suitable as a year round live- aboard
recreational vessel
suitable as a year round live- aboard
recreational vessel
General information:
offered in the condition that she is in
Additional information:
Hull shape is suitable for drying out.
beautiful sheer
classic lines
forepeak with chain locker
Great vessel for cruising on the European canals and rivers.
Great vessel for cruising on the French canals and rivers.
beautiful sheer
classic lines
forepeak with chain locker
Great vessel for cruising on the European canals and rivers.
Great vessel for cruising on the French canals and rivers.
Technical information
Enginepower:
180 Hp
132 kW
132 kW
Engine brand:
Caterpillar
Revolutions:
1700 RPM
Engine model:
D333
Number of cylinders:
6
Construction year engine:
approximately 1969
Fuel:
diesel
Fuel tank (approx.):
2x 400 litre
steel tank(s)
steel tank(s)
Cooling system:
closed
box cooler
box cooler
Propulsion:
3 blade propeller
greased lubrication of propeller shaft
greased lubrication of propeller shaft
Gearbox:
Caterpillar (Twin Disc) 6L.7604 hydraulic
reduction/ratio 3,339:1
reduction/ratio 3,339:1
Speed (approx.):
10 km/hour cruising speed at 1200 RPM
14 km/hour top speed
14 km/hour top speed
Heating:
stove on wood
Bow thruster:
hydraulic bow thruster
20 Hp
proportional
20 Hp
proportional
Electricity system:
24 / 230 Volt
230 Volt shore power connection
simple electric system
230 Volt shore power connection
simple electric system
Batteries:
2x 180 Ah starter batterie(s)
4x 240 Ah domestic batterie(s)
4x 240 Ah domestic batterie(s)
Battery charger:
Victron Phoenix Multiplus combi inverter/charger 24/3000/70
Victron Skylla battery charger 24/75
Victron Skylla battery charger 24/75
Inverter:
Victron Phoenix Multiplus combi inverter/charger 24/3000/70
Mastervolt 8661 inverter 24-12 Volt
Mastervolt 8661 inverter 24-12 Volt
Solar panels:
2x solar panel
Victron MPPT charge controller 75/15
Victron MPPT charge controller 75/15
Fresh water tank (approx.):
2x 1500 litre
plastic tank(s)
plastic tank(s)
Water pressure system:
electric water pump
Hot water system:
present
Rheinstrom boiler/water calorifier (230 Volt)
Rheinstrom boiler/water calorifier (230 Volt)
Holding tank (approx.):
present
not yet in use
1 plastic tank(s)
200 litre
not yet in use
1 plastic tank(s)
200 litre
Diesel waterseparator:
present
Deck wash pump:
present
230 Volt
230 Volt
Gas system:
no gas on board
Additional information:
main engine with PTO for the hydraulic
Accommodation
Interior:
see photographs
Insulation:
partly
Toilet / Heads:
electric toilet
Galley:
along ships
Fridge / Refrigerator:
present
230 Volt
230 Volt
Worktop:
formica worktop
Washbasin:
2x stainless steel sink
Water tap:
mixer tap with hot & cold running water
Headroom (approx.):
forward (approx.) 1,92 m
midships (approx.) 2,12 m
deckhouse (approx.) 2,10 m
midships (approx.) 2,12 m
deckhouse (approx.) 2,10 m
Equipment
Anchor equipment:
manual anchor winch
Klipp anchor
anchor cable
in hawse-hole
2x spudleg / pole (hydraulic)
2,50 m under the bottom
specified length(s) is/are approximate
Klipp anchor
anchor cable
in hawse-hole
2x spudleg / pole (hydraulic)
2,50 m under the bottom
specified length(s) is/are approximate
Boarding ladder:
present
aluminium
aluminium
Searail / Pulpit:
guardrail around side-walks
Davits:
with boom
hydraulic
hydraulic
Safety:
fire extinguishers
life jackets
life buoys
according to the certification requirements
life jackets
life buoys
according to the certification requirements
Additional information:
fenders
The ship was completely gutted (only the hull is old) and then rebuilt. Before refitting the interior, the inside of the hull was thoroughly treated.
Survey report of the underwatership is available (05-2018)
Interesting project to finish for someone with two right hands or to have it done by a yard.
The ship was completely gutted (only the hull is old) and then rebuilt. Before refitting the interior, the inside of the hull was thoroughly treated.
Survey report of the underwatership is available (05-2018)
Interesting project to finish for someone with two right hands or to have it done by a yard.